diff --git a/Linux/ssh.md b/Linux/ssh.md deleted file mode 100644 index 1c44b6e..0000000 --- a/Linux/ssh.md +++ /dev/null @@ -1,531 +0,0 @@ -# SSH -## OpenSSH SSH client (remote login program) - -- SSH: (SSH client) is a program for logging into a remote machine and for executing commands on a - remote machine -- SSH Server: server - -## Fist login to remote server -```bash -$ ssh student@172.30.6.99 -The authenticity of host '172.30.6.99 (172.30.6.99)' can't be established. -ECDSA key fingerprint is SHA256:w2XxVfnfPpYCeCjEBzmI0AeuaqiC0Sx1FBwrGmnYh64. -Are you sure you want to continue connecting (yes/no)? yes -Warning: Permanently added '172.30.6.99' (ECDSA) to the list of known hosts. -student@172.30.6.99's password: -Connection closed by 172.30.6.99 port 22 -``` -## Login to remote server -```bash -admin@d3bi4n:~$ ssh student@172.30.6.99 -student@172.30.6.99's password: -Linux debianserver 4.19.0-16-amd64 #1 SMP Debian 4.19.181-1 (2021-03-19) x86_64 - -The programs included with the Debian GNU/Linux system are free software; -the exact distribution terms for each program are described in the -individual files in /usr/share/doc/*/copyright. - -Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent -permitted by applicable law. -Last login: Thu Apr 8 11:15:57 2021 from 172.30.6.84 - -``` -ECDSA key finger print is used to validate the server identity for future connection. - -## Installing OpenSSH Server on Debian 10 - -First of all, make sure that your packages are up to date by running an update command -```bash -$ sudo apt-get update -``` -Updating apt packages on Debian 10 - -In order to install a SSH server on Debian 10, run the following command -```bash -$ sudo apt-get install openssh-server -``` -The command should run a complete installation process and it should set up all the necessary files for your SSH server. - -If the installation was successful, you should now have a sshd service installed on your host. - -To check your newly installed service, run the following command -```bash -$ sudo systemctl status sshd -user@w3b-73rv3r:~$ sudo systemctl status sshd -[sudo] password for user: -● ssh.service - OpenBSD Secure Shell server - Loaded: loaded (/lib/systemd/system/ssh.service; enabled; vendor preset: enabled) - Active: active (running) since Thu 2021-04-08 05:35:36 EDT; 10min ago - Docs: man:sshd(8) - man:sshd_config(5) - Process: 490 ExecStartPre=/usr/sbin/sshd -t (code=exited, status=0/SUCCESS) - Main PID: 499 (sshd) - Tasks: 1 (limit: 4689) - Memory: 3.8M - CGroup: /system.slice/ssh.service - └─499 /usr/sbin/sshd -D - -Apr 08 05:35:36 w3b-73rv3r systemd[1]: Starting OpenBSD Secure Shell server... -Apr 08 05:35:36 w3b-73rv3r sshd[499]: Server listening on 0.0.0.0 port 22. -Apr 08 05:35:36 w3b-73rv3r sshd[499]: Server listening on :: port 22. -Apr 08 05:35:36 w3b-73rv3r systemd[1]: Started OpenBSD Secure Shell server. -Apr 08 05:45:17 w3b-73rv3r sshd[1663]: Accepted password for user from 172.30.6.99 port 55748 ssh2 -Apr 08 05:45:17 w3b-73rv3r sshd[1663]: pam_unix(sshd:session): session opened for user user by (uid=0) -r4v3n@w3b-73rv3r:~$ - -``` - -This tutorial focuses on setting up and configuring a SSH server on a Debian 10 minimal server - -SSH, for Secure Shell, is a network protocol that is used in order to operate remote logins to distant machines within a local network or over Internet. SSH architectures typically includes a SSH server that is used by SSH clients to connect to the remote machine. - -As a system administrator, it is very likely that you are using SSH on a daily basis to connect to remote machines across your network. - -As a consequence, when new hosts are onboarded to your infrastructure, you may have to configure them to install and enable SSH on them. - -In this tutorial, we are going to see how you can install and enable SSH, via OpenSSH, on a Debian 10 distributions. - -Table of Contents - - Prerequisites - Installing OpenSSH Server on Debian 10 - Enabling SSH traffic on your firewall settings - Enable SSH server on system boot - Configuring your SSH server on Debian - Changing SSH default port - Disabling Root Login on your SSH server - Configuring key-based SSH authentication - Restarting your SSH server to apply changes - Connecting to your SSH server - Exiting your SSH server - Disabling your SSH server - Troubleshooting - Debian : SSH connection refused - Debian : SSH access denied - SSH password access denied - SSH key access denied - Debian : Unable to locate package openssh-server - Conclusion - -Prerequisites - -In order to install a SSH server on Debian 10, you will need to have sudo privileges on your host. - -To check whether you have sudo privileges or not, run the following command - -$ sudo -l - -If you are seeing the following entries on your terminal, it means that you have elevated privileges -Checking sudo privileges on Debian 10 - -By default, the ssh utility should be installed on your host, even on minimal configurations. - -In order to check the version of your SSH utility, you can run the following command - -$ ssh -V - -Checking SSH version on Debian 10 - -As you can see, I am running OpenSSH v7.9 with OpenSSL v1.1.1. - -Note that it does not mean that SSH servers are installed on my host, it just means that I may able to connect to remote machines as a client using the SSH utility. - -It also mean that specific utilities related the SSH protocol (such as scp for example) or related to FTP servers (such as sftp) will be available on my host. -Installing OpenSSH Server on Debian 10 - -First of all, make sure that your packages are up to date by running an update command - -$ sudo apt-get update - -Updating apt packages on Debian 10 - -In order to install a SSH server on Debian 10, run the following command - -$ sudo apt-get install openssh-server - -The command should run a complete installation process and it should set up all the necessary files for your SSH server. - -If the installation was successful, you should now have a sshd service installed on your host. - -To check your newly installed service, run the following command - -$ sudo systemctl status sshd - -Checking ssh server status on Debian 10 - -By default, your SSH server is going to run on port 22. - -This is the default port assigned for SSH communications. You can check if this is the case on your host by running the following netstat command - -$ netstat -tulpn | grep 22 - -Great! Your SSH server is now up and running on your Debian 10 host. -Enabling SSH traffic on your firewall settings - -If you are using UFW as a default firewall on your Debian 10 system, it is likely that you need to allow SSH connections on your host. - -To enable SSH connections on your host, run the following command - -$ sudo ufw allow ssh - -Enabling SSH connections with UFW on Debian 10 -Enable SSH server on system boot - -As you probably saw, your SSH server is now running as a service on your host. - -It is also very likely that it is instructed to start at boot time. - -To check whether your service is enable or not, you can run the following command - -$ sudo systemctl list-unit-files | grep enabled | grep ssh - -If no results are shown on your terminal, enable the service and run the command again - -$ sudo systemctl enable ssh - -Configuring your SSH server on Debian - -Before giving access to users through SSH, it is important to have a set of secure settings to avoid being attacked, especially if your server is running as an online VPS. - -As we already saw in the past, SSH attacks are pretty common but they can be avoided if we change default settings available. - -By default, your SSH configuration files are located at /etc/ssh/ -Listing SSH configuration files in etc - -In this directory, you are going to find many different configuration files, but the most important ones are : - - ssh_config: defines SSH rules for clients. It means that it defines rules that are applied everytime you use SSH to connect to a remote host or to transfer files between hosts; - sshd_config: defines SSH rules for your SSH server. It is used for example to define the reachable SSH port or to deny specific users from communicating with your server. - -We are obviously going to modify the server-wide part of our SSH setup as we are interested in configuring and securing our OpenSSH server. - - -Changing SSH default port - -The first step towards running a secure SSH server is to change the default assigned by the OpenSSH server. - -Edit your sshd_config configuration file and look for the following line. - -#Port 22 - -Make sure to change your port to one that is not reserved for other protocols. I will choose 2222 in this case. -Changing the default SSH port - -When connecting to your host, if it not running on the default port, you are going to specify the SSH port yourself. - -Please refer to the ‘Connecting to your SSH server’ section for further information. -Disabling Root Login on your SSH server - -By default, root login is available on your SSH server. - -It should obviously not be the case as it would be a complete disaster if hackers were to login as root on your server. - -If by chance you disabled the root account in your Debian 10 installation, you can still configure your SSH server to refuse root login, in case you choose to re-enable your root login one day. - -To disable root login on your SSH server, modify the following line - - -#PermitRootLogin - -PermitRootLogin no - -Disabling root login for SSH on Debian -Configuring key-based SSH authentication - -In SSH, there are two ways of connecting to your host : by using password authentication (what we are doing here), or having a set of SSH keys. - -If you are curious about key-based SSH authentication on Debian 10, there is a tutorial available on the subject here. -Restarting your SSH server to apply changes - -In order for the changes to be applied, restart your SSH service and make sure that it is correctly restarted - -$ sudo systemctl restart sshd -$ sudo systemctl status sshd - -SSH server status from systemd - - - -BasicsLinux System Administration -How To Install and Enable SSH Server on Debian 10 -written by schkn -How To Install and Enable SSH Server on Debian 10 - -This tutorial focuses on setting up and configuring a SSH server on a Debian 10 minimal server - -SSH, for Secure Shell, is a network protocol that is used in order to operate remote logins to distant machines within a local network or over Internet. SSH architectures typically includes a SSH server that is used by SSH clients to connect to the remote machine. - -As a system administrator, it is very likely that you are using SSH on a daily basis to connect to remote machines across your network. - -As a consequence, when new hosts are onboarded to your infrastructure, you may have to configure them to install and enable SSH on them. - -In this tutorial, we are going to see how you can install and enable SSH, via OpenSSH, on a Debian 10 distributions. - -Table of Contents - - Prerequisites - Installing OpenSSH Server on Debian 10 - Enabling SSH traffic on your firewall settings - Enable SSH server on system boot - Configuring your SSH server on Debian - Changing SSH default port - Disabling Root Login on your SSH server - Configuring key-based SSH authentication - Restarting your SSH server to apply changes - Connecting to your SSH server - Exiting your SSH server - Disabling your SSH server - Troubleshooting - Debian : SSH connection refused - Debian : SSH access denied - SSH password access denied - SSH key access denied - Debian : Unable to locate package openssh-server - Conclusion - -Prerequisites - -In order to install a SSH server on Debian 10, you will need to have sudo privileges on your host. - -To check whether you have sudo privileges or not, run the following command - -$ sudo -l - -If you are seeing the following entries on your terminal, it means that you have elevated privileges -Checking sudo privileges on Debian 10 - -By default, the ssh utility should be installed on your host, even on minimal configurations. - -In order to check the version of your SSH utility, you can run the following command - -$ ssh -V - -Checking SSH version on Debian 10 - -As you can see, I am running OpenSSH v7.9 with OpenSSL v1.1.1. - -Note that it does not mean that SSH servers are installed on my host, it just means that I may able to connect to remote machines as a client using the SSH utility. - -It also mean that specific utilities related the SSH protocol (such as scp for example) or related to FTP servers (such as sftp) will be available on my host. -Installing OpenSSH Server on Debian 10 - -First of all, make sure that your packages are up to date by running an update command - -$ sudo apt-get update - -Updating apt packages on Debian 10 - -In order to install a SSH server on Debian 10, run the following command - -$ sudo apt-get install openssh-server - -The command should run a complete installation process and it should set up all the necessary files for your SSH server. - -If the installation was successful, you should now have a sshd service installed on your host. - -To check your newly installed service, run the following command - -$ sudo systemctl status sshd - -Checking ssh server status on Debian 10 - -By default, your SSH server is going to run on port 22. - -This is the default port assigned for SSH communications. You can check if this is the case on your host by running the following netstat command - -$ netstat -tulpn | grep 22 - -Great! Your SSH server is now up and running on your Debian 10 host. -Enabling SSH traffic on your firewall settings - -If you are using UFW as a default firewall on your Debian 10 system, it is likely that you need to allow SSH connections on your host. - -To enable SSH connections on your host, run the following command - -$ sudo ufw allow ssh - -Enabling SSH connections with UFW on Debian 10 -Enable SSH server on system boot - -As you probably saw, your SSH server is now running as a service on your host. - -It is also very likely that it is instructed to start at boot time. - -To check whether your service is enable or not, you can run the following command - -$ sudo systemctl list-unit-files | grep enabled | grep ssh - -If no results are shown on your terminal, enable the service and run the command again - -$ sudo systemctl enable ssh - -Enabling the SSH server on boot on Debian 10 -Configuring your SSH server on Debian - -Before giving access to users through SSH, it is important to have a set of secure settings to avoid being attacked, especially if your server is running as an online VPS. - -As we already saw in the past, SSH attacks are pretty common but they can be avoided if we change default settings available. - -By default, your SSH configuration files are located at /etc/ssh/ -Listing SSH configuration files in etc - -In this directory, you are going to find many different configuration files, but the most important ones are : - - ssh_config: defines SSH rules for clients. It means that it defines rules that are applied everytime you use SSH to connect to a remote host or to transfer files between hosts; - sshd_config: defines SSH rules for your SSH server. It is used for example to define the reachable SSH port or to deny specific users from communicating with your server. - -We are obviously going to modify the server-wide part of our SSH setup as we are interested in configuring and securing our OpenSSH server. -Changing SSH default port - -The first step towards running a secure SSH server is to change the default assigned by the OpenSSH server. - -Edit your sshd_config configuration file and look for the following line. - -#Port 22 - -Make sure to change your port to one that is not reserved for other protocols. I will choose 2222 in this case. -Changing the default SSH port - -When connecting to your host, if it not running on the default port, you are going to specify the SSH port yourself. - -Please refer to the ‘Connecting to your SSH server’ section for further information. -Disabling Root Login on your SSH server - -By default, root login is available on your SSH server. - -It should obviously not be the case as it would be a complete disaster if hackers were to login as root on your server. - -If by chance you disabled the root account in your Debian 10 installation, you can still configure your SSH server to refuse root login, in case you choose to re-enable your root login one day. - -To disable root login on your SSH server, modify the following line - -#PermitRootLogin - -PermitRootLogin no - -Disabling root login for SSH on Debian -Configuring key-based SSH authentication - -In SSH, there are two ways of connecting to your host : by using password authentication (what we are doing here), or having a set of SSH keys. - -If you are curious about key-based SSH authentication on Debian 10, there is a tutorial available on the subject here. -Restarting your SSH server to apply changes - -In order for the changes to be applied, restart your SSH service and make sure that it is correctly restarted - -$ sudo systemctl restart sshd -$ sudo systemctl status sshd - -SSH server status from systemd - -Also, if you change the default port, make sure that the changes were correctly applied by running a simple netstat command - -$ netstat -tulpn | grep 2222 - -Checking SSH port on Linux using netstat -Connecting to your SSH server - -In order to connect to your SSH server, you are going to use the ssh command with the following syntax - -$ ssh -p @ - -If you are connecting over a LAN network, make sure to get the local IP address of your machine with the following command - -$ sudo ifconfig - -Checking local IP using ifconfig - -For example, in order to connect to my own instance located at 127.0.0.1, I would run the following command - -$ ssh -p 2222 @127.0.0.1 - -You will be asked to provide your password and to certify that the authenticity of the server is correct. -Connecting to SSH server on Debian 10 Buster -Exiting your SSH server - -In order to exit from your SSH server on Debian 10, you can hit Ctrl + D or type ‘logout’ and your connection will be terminated. -Logout from the SSH server -Disabling your SSH server - -In order to disable your SSH server on Debian 10, run the following command - -$ sudo systemctl stop sshd -$ sudo systemctl status sshd - -From there, your SSH server won’t be accessible anymore. -Connection refused from the SSH server -Troubleshooting - -In some cases, you may run into many error messages when trying to setup a SSH server on Debian 10. - -Here is the list of the common errors you might get during the setup. -Debian : SSH connection refused - -Usually, you are getting this error because your firewall is not properly configured on Debian. - -To solve “SSH connection refused” you have to double check your UFW firewall settings. - -By default, Debian uses UFW as a default firewall, so you might want to check your firewall rules and see if SSH is correctly allowed. - -$ sudo ufw status - -Status: active - -To Action From --- ------ ---- -22/tcp ALLOW Anywhere - -If you are using iptables, you can also have a check at your current IP rules with the iptables command. - -$ sudo iptables -L -n - -Chain INPUT (policy ACCEPT) -target prot opt source destination -ACCEPT tcp -- anywhere anywhere tcp dpt:ssh - -If the rule is not set for SSH, you can set by running the iptables command again. - -$ sudo iptables -I INPUT -p tcp -m tcp --dport 22 -j ACCEPT - -Debian : SSH access denied - -Sometimes, you may be denied the access to your SSH server with this error message “SSH access denied” on Debian. - -To solve this issue, it depends on the authentication method you are using. -SSH password access denied - -If you are using the password method, double check your password and make sure you are entering it correctly. - -Also, it is possible to configure SSH servers to allow only a specific subset of users : if this is the case, make sure you belong to that list. - -Finally, if you want to log-in as root, make sure that you modified the “PermitRootLogin” option in your “sshd_config” file. - -#PermitRootLogin - -PermitRootLogin yes - -SSH key access denied - -If you are using SSH keys for your SSH authentication, you may need to double check that the key is correctly located in the “authorized_keys” file. - -If you are not sure about how to do it, follow our guide about SSH key authentication on Debian 10. - -Debian : Unable to locate package openssh-server - -For this one, you have to make sure that you have set correctly your APT repositories. - -Add the following entry to your sources.list file and update your packages. - -$ sudo nano /etc/apt/sources.list - -deb http://ftp.us.debian.org/debian wheezy main - -$ sudo apt-get update - -Conclusion - -In this tutorial, you learnt how you can install and configure a SSH server on Debian 10 hosts. - -You also learnt about basic configuration options that need to be applied in order to run a secure and robust SSH server over a LAN or over Internet. - -If you are curious about Linux system administration, we have a ton of tutorials on the subject in a dedicated category. diff --git a/Linux/ssh_server.md b/Linux/ssh_server.md deleted file mode 100644 index 56e82db..0000000 --- a/Linux/ssh_server.md +++ /dev/null @@ -1,249 +0,0 @@ -# How To Install and Enable SSH Server on Debian 10 - -SSH, for Secure Shell, is a network protocol that is used in order to operate remote logins to distant machines within a local network or over Internet. SSH architectures typically includes a SSH server that is used by SSH clients to connect to the remote machine. - -As a system administrator, it is very likely that you are using SSH on a daily basis to connect to remote machines across your network. - -As a consequence, when new hosts are onboarded to your infrastructure, you may have to configure them to install and enable SSH on them. - -In this tutorial, we are going to see how you can install and enable SSH, via OpenSSH, on a Debian 10 distributions. - -# Prerequisites - -In order to install a SSH server on Debian 10, you will need to have sudo privileges on your host. - -To check whether you have sudo privileges or not, run the following command - -> $ sudo -l - -By default, the ssh utility should be installed on your host, even on minimal configurations. - -In order to check the version of your SSH utility, you can run the following command - -> $ ssh -V - -# Installing OpenSSH Server on Debian 10 - -First of all, make sure that your packages are up to date by running an update command - -> $ sudo apt-get update - -In order to install a SSH server on Debian 10, run the following command - -> $ sudo apt-get install openssh-server - -The command should run a complete installation process and it should set up all the necessary files for your SSH server. - -If the installation was successful, you should now have a sshd service installed on your host. - -To check your newly installed service, run the following command - -> $ sudo systemctl status sshd - -By default, your SSH server is going to run on port 22. - -This is the default port assigned for SSH communications. You can check if this is the case on your host by running the following netstat command - -> $ netstat -tulpn | grep 22 - -Great! Your SSH server is now up and running on your Debian 10 host. -Enabling SSH traffic on your firewall settings - -If you are using UFW as a default firewall on your Debian 10 system, it is likely that you need to allow SSH connections on your host. - -To enable SSH connections on your host, run the following command - -$ sudo ufw allow ssh - -Enabling SSH connections with UFW on Debian 10 -Enable SSH server on system boot - -As you probably saw, your SSH server is now running as a service on your host. - -It is also very likely that it is instructed to start at boot time. - -To check whether your service is enable or not, you can run the following command - -$ sudo systemctl list-unit-files | grep enabled | grep ssh - -If no results are shown on your terminal, enable the service and run the command again - -$ sudo systemctl enable ssh - -Enabling the SSH server on boot on Debian 10 -Configuring your SSH server on Debian - -Before giving access to users through SSH, it is important to have a set of secure settings to avoid being attacked, especially if your server is running as an online VPS. - -As we already saw in the past, SSH attacks are pretty common but they can be avoided if we change default settings available. - -By default, your SSH configuration files are located at /etc/ssh/ -Listing SSH configuration files in etc - -In this directory, you are going to find many different configuration files, but the most important ones are : - - ssh_config: defines SSH rules for clients. It means that it defines rules that are applied everytime you use SSH to connect to a remote host or to transfer files between hosts; - sshd_config: defines SSH rules for your SSH server. It is used for example to define the reachable SSH port or to deny specific users from communicating with your server. - -We are obviously going to modify the server-wide part of our SSH setup as we are interested in configuring and securing our OpenSSH server. -Changing SSH default port - -The first step towards running a secure SSH server is to change the default assigned by the OpenSSH server. - -Edit your sshd_config configuration file and look for the following line. - -#Port 22 - -Make sure to change your port to one that is not reserved for other protocols. I will choose 2222 in this case. -Changing the default SSH port - -When connecting to your host, if it not running on the default port, you are going to specify the SSH port yourself. - -Please refer to the ‘Connecting to your SSH server’ section for further information. -Disabling Root Login on your SSH server - -By default, root login is available on your SSH server. - -It should obviously not be the case as it would be a complete disaster if hackers were to login as root on your server. - -If by chance you disabled the root account in your Debian 10 installation, you can still configure your SSH server to refuse root login, in case you choose to re-enable your root login one day. - -To disable root login on your SSH server, modify the following line - -#PermitRootLogin - -PermitRootLogin no - -Disabling root login for SSH on Debian -Configuring key-based SSH authentication - -In SSH, there are two ways of connecting to your host : by using password authentication (what we are doing here), or having a set of SSH keys. - -If you are curious about key-based SSH authentication on Debian 10, there is a tutorial available on the subject here. -Restarting your SSH server to apply changes - -In order for the changes to be applied, restart your SSH service and make sure that it is correctly restarted - -$ sudo systemctl restart sshd -$ sudo systemctl status sshd - -SSH server status from systemd - -Also, if you change the default port, make sure that the changes were correctly applied by running a simple netstat command - -$ netstat -tulpn | grep 2222 - -Checking SSH port on Linux using netstat -Connecting to your SSH server - -In order to connect to your SSH server, you are going to use the ssh command with the following syntax - -$ ssh -p @ - -If you are connecting over a LAN network, make sure to get the local IP address of your machine with the following command - -$ sudo ifconfig - -Checking local IP using ifconfig - -For example, in order to connect to my own instance located at 127.0.0.1, I would run the following command - -$ ssh -p 2222 @127.0.0.1 - -You will be asked to provide your password and to certify that the authenticity of the server is correct. -Connecting to SSH server on Debian 10 Buster -Exiting your SSH server - -In order to exit from your SSH server on Debian 10, you can hit Ctrl + D or type ‘logout’ and your connection will be terminated. -Logout from the SSH server -Disabling your SSH server - -In order to disable your SSH server on Debian 10, run the following command - -```bash -$ sudo systemctl stop sshd -$ sudo systemctl status sshd -``` - -# Stopping SSH server on Debian 10 - -From there, your SSH server won’t be accessible anymore. -Connection refused from the SSH server -Troubleshooting - -In some cases, you may run into many error messages when trying to setup a SSH server on Debian 10. - -Here is the list of the common errors you might get during the setup. -# Debian : SSH connection refused - -Usually, you are getting this error because your firewall is not properly configured on Debian. - -To solve “SSH connection refused” you have to double check your UFW firewall settings. - -By default, Debian uses UFW as a default firewall, so you might want to check your firewall rules and see if SSH is correctly allowed. - -```bash -$ sudo ufw status - -Status: active - -To Action From --- ------ ---- -22/tcp ALLOW Anywhere -``` -If you are using iptables, you can also have a check at your current IP rules with the iptables command. - -$ sudo iptables -L -n - -Chain INPUT (policy ACCEPT) -target prot opt source destination -ACCEPT tcp -- anywhere anywhere tcp dpt:ssh - -If the rule is not set for SSH, you can set by running the iptables command again. - -$ sudo iptables -I INPUT -p tcp -m tcp --dport 22 -j ACCEPT - -Debian : SSH access denied - -Sometimes, you may be denied the access to your SSH server with this error message “SSH access denied” on Debian. - -To solve this issue, it depends on the authentication method you are using. -SSH password access denied - -If you are using the password method, double check your password and make sure you are entering it correctly. - -Also, it is possible to configure SSH servers to allow only a specific subset of users : if this is the case, make sure you belong to that list. - -Finally, if you want to log-in as root, make sure that you modified the “PermitRootLogin” option in your “sshd_config” file. - -```bash -PermitRootLogin - -PermitRootLogin yes -``` -# SSH key access denied - -If you are using SSH keys for your SSH authentication, you may need to double check that the key is correctly located in the “authorized_keys” file. - -If you are not sure about how to do it, follow our guide about SSH key authentication on Debian 10. - -# Debian : Unable to locate package openssh-server - -For this one, you have to make sure that you have set correctly your APT repositories. - -Add the following entry to your sources.list file and update your packages. - -```bash -$ sudo nano /etc/apt/sources.list - -deb http://ftp.us.debian.org/debian wheezy main - -$ sudo apt-get update -``` -Conclusion - -In this tutorial, you learnt how you can install and configure a SSH server on Debian 10 hosts. - -You also learnt about basic configuration options that need to be applied in order to run a secure and robust SSH server over a LAN or over Internet. - -If you are curious about Linux system administration, we have a ton of tutorials on the subject in a dedicated category.