waldek
/
linux_course_doc
1
0
Fork 0
Code Issues 2 Pull Requests Projects Releases Wiki Activity
linux_course_doc/certificates/essentials/exercises_sudomateo.md

17 KiB
Raw Blame History

Linux essentials source

  1. Change into the /tmp directory using the command cd /tmp.
  2. Confirm you are in the /tmp directory using the command pwd.
  3. Change back into your home directory using the command cd.
  4. Confirm you are in your home directory using the command pwd.
  5. Print the text This is file01. to the file /tmp/file01 using the command echo "This is file01." > /tmp/file01.
  6. Confirm the /tmp/file01 file has the correct content using the command cat /tmp/file01.
  7. Append the text This is appended. to the file /tmp/file01 using the command echo "This is appended." >> /tmp/file01.
  8. Confirm the /tmp/file01 file has the updated content using the command cat /tmp/file01.
  9. Send the output of the printenv command to a new file named /tmp/myenv using the command printenv > /tmp/myenv.
  10. View the first five lines of the /tmp/myenv file using the command head -n 5 /tmp/myenv.
  11. Declare and export a new environment variable with the command export COURSE_NAME="LSA1".
  12. Verify your newly exported environment variable exists using the command printenv | grep COURSE_NAME.
  13. Practice these and other commands until you feel comfortable with them.
  14. When finished, use the exit command to exit the shell and logout.

Managing files source

  1. Create a directory for these exercises by using the command mkdir /tmp/managing-files.
  2. Change into the newly created directory using the command cd /tmp/managing-files.
  3. Create six empty files using the command touch file{01..06}.
  4. Run each of the following commands to change the permissions of each file. See if you can guess what the permissions will be before you run each command:
    1. chmod 764 file01
    2. chmod 400 file02
    3. chmod 651 file03
    4. chmod 4744 file04
    5. chmod 4664 file05
    6. chmod 1444 file06
  5. Run the command ls -l. You should see output similar to the following.
$ ls -l
total 0
-rwxrw-r--. 1 vagrant vagrant 0 Aug 23 01:10 file01
-r--------. 1 vagrant vagrant 0 Aug 23 01:10 file02
-rw-r-x--x. 1 vagrant vagrant 0 Aug 23 01:10 file03
-rwsr--r--. 1 vagrant vagrant 0 Aug 23 01:10 file04
-rwSrw-r--. 1 vagrant vagrant 0 Aug 23 01:10 file05
-r--r--r-T. 1 vagrant vagrant 0 Aug 23 01:10 file06
  1. Run the commmand tar -zcvf /tmp/managing-files.tgz -C /tmp/managing-files . to create an archive named /tmp/managing-files.tgz of all the files in the /tmp/managing-files directory.
  2. Run the command rm -f file0* to remove all six files that were created earlier. Verify the files were removed using the command ls -l.
  3. Run the command tar -zxvf /tmp/managing-files.tgz -C /tmp/managing-files to extract the contents of your archive back into the /tmp/managing-files directory.
  4. Verify the files were restored correctly using the command ls -l. You should see output similar to the following. NOTE: tar does not restore special permissions (SUID, SGID, sticky bit) so you will only see the read, write, and execute permissions.
$ ls -l
total 0
-rwxrw-r--. 1 vagrant vagrant 0 Aug 23 01:10 file01
-r--------. 1 vagrant vagrant 0 Aug 23 01:10 file02
-rw-r-x--x. 1 vagrant vagrant 0 Aug 23 01:10 file03
-rwxr--r--. 1 vagrant vagrant 0 Aug 23 01:10 file04
-rw-rw-r--. 1 vagrant vagrant 0 Aug 23 01:10 file05
-r--r--r--. 1 vagrant vagrant 0 Aug 23 01:10 file06
  1. Practice these and other commands until you feel comfortable with them.
  2. When finished, use the exit command to exit the shell and logout.

Managing software source

Apt

  1. Install the screen package using the command sudo apt install screen. Press ++y++ if prompted.
  2. Verify the screen package is installed using the command sudo apt list screen. You should see the matching output.
  3. Remove the screen package using the command sudo apt remove screen.
  4. Verify the screen package is removed using the command sudo apt list screen | grep installed. You should see no matching output.
  5. Run the command sudo apt install nginx to install the nginx webserver. Press ++y++ if prompted.
  6. Run the command sudo systemctl status nginx to see the status of the nginx webserver. It should show inactive or dead.
  7. Run the command sudo systemctl start nginx to start the nginx webserver.
  8. On your local workstation, open a web browser and navigate to http://127.0.0.1:8080. You should see an nginx test page.
  9. Run the command sudo systemctl stop nginx to stop the nginx webserver.
  10. Try to reload the web page on your local workstation. It should not load this time.
  11. Verify the nginx service is not running using the command sudo systemctl status nginx.
  12. Practice these and other commands until you feel comfortable with them.
  13. When finished, use the exit command to exit the shell and logout.

Yum

  1. Install the screen package using the command sudo yum install screen. Press ++y++ if prompted.
  2. Verify the screen package is installed using the command sudo yum list installed | grep -i screen. You should see the matching output.
  3. Remove the screen package using the command sudo yum remove screen.
  4. Verify the screen package is removed using the command sudo yum list installed | grep -i screen. You should see no matching output.
  5. Run the command sudo yum install epel-release to install the EPEL repository.
  6. Run the command sudo yum install nginx to install the nginx webserver. Press ++y++ if prompted.
  7. Run the command sudo systemctl status nginx to see the status of the nginx webserver. It should show inactive or dead.
  8. Run the command sudo systemctl start nginx to start the nginx webserver.
  9. On your local workstation, open a web browser and navigate to http://127.0.0.1:8080. You should see an nginx test page.
  10. Run the command sudo systemctl stop nginx to stop the nginx webserver.
  11. Try to reload the web page on your local workstation. It should not load this time.
  12. Verify the nginx service is not running using the command sudo systemctl status nginx.
  13. Practice these and other commands until you feel comfortable with them.
  14. When finished, use the exit command to exit the shell and logout.

General

  1. Run the command ps aux to view all of the processes currently executing on the system.
  2. Run the command top to view all of the processes and their resource usage. Notice how the output refreshed every 2 seconds. Press ++q++ to quit when done looking around.
  3. Run the command sleep 60. Press ++ctrl+c++ to quit the command early.
  4. Run the command sleep 15 & to run sleep in the background. Run the jobs command to verify the background command is still running. Wait for 15 seconds and run the jobs command again to verify that the job is no longer executing in the background.
  5. Run the command sleep 600 & to run the sleep 600 command in the background. You will be shown the PID of the background process. Keep a note of this for the next steps.
    1. Verify the PID exists using the command ps aux | grep PID where PID is the PID from earlier.
    2. Use the kill -15 PID command where PID is the PID from earlier to send a SIGTERM command to that process.
    3. Run the jobs command to verify your background process was terminated.
  6. Run the command sleep 444 & to run the sleep 444 command in the background. You will be shown the PID of the background process. Keep a note of this for the next steps.
    1. Verify the PID exists using the command ps aux | grep PID where PID is the PID from earlier.
    2. Use the kill -9 PID command where PID is the PID from earlier to send a SIGKILL command to that process.
    3. Run the jobs command to verify your background process was killed.

Configuring hardware source

  1. Drop down to the root user using the command sudo su -.
  2. Verify the /dev/sdb and dev/sdc devices are attached to your system by running the command lsblk. You should see output similar to the following:
[root@lsa-i ~]# lsblk
NAME                    MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda                       8:0    0   40G  0 disk
├─sda1                    8:1    0    1M  0 part
├─sda2                    8:2    0    1G  0 part /boot
└─sda3                    8:3    0   39G  0 part
  ├─VolGroup00-LogVol00 253:0    0 37.5G  0 lvm  /
  └─VolGroup00-LogVol01 253:1    0  1.5G  0 lvm  [SWAP]
sdb                       8:16   0    1G  0 disk
sdc                       8:32   0    1G  0 disk
  1. Run the command fdisk /dev/sdb to begin formatting the device dev/sdb. Follow the subtasks below to format the device with 1 partition that takes up all the space:
    1. Type n and hit ++enter++ to create a new partition.
    2. Type p and hit ++enter++ to make this a primary partition.
    3. Type 1 and hit ++enter++ to make this primary partition the first partition on this device.
    4. Hit ++enter++ to accept the default first sector.
    5. Hit ++enter++ to accept the default last sector.
    6. Type p and hit ++enter++ to print the proposed partition changes. You should see the partition /dev/sdb1.
    7. Type w and hit ++enter++ to write these changes to the device and exit.
  2. Verify the /dev/sdb1 partition was created successfully by running the command lsblk. You should see output similar to the following:
[root@lsa-i ~]# lsblk
NAME                    MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda                       8:0    0   40G  0 disk
├─sda1                    8:1    0    1M  0 part
├─sda2                    8:2    0    1G  0 part /boot
└─sda3                    8:3    0   39G  0 part
  ├─VolGroup00-LogVol00 253:0    0 37.5G  0 lvm  /
  └─VolGroup00-LogVol01 253:1    0  1.5G  0 lvm  [SWAP]
sdb                       8:16   0    1G  0 disk
└─sdb1                    8:17   0 1023M  0 part
sdc                       8:32   0    1G  0 disk
  1. Run the command mkfs.xfs /dev/sdb1 to create an XFS file system on the /dev/sdb1 partition.
  2. Run the command lsblk -f to list the UUID and file system type of the /dev/sdb1 partition. You'll need this information for the /etc/fstab file.
  3. Run the command mkdir /mnt/exercise01 to create a directory to use for mounting the /dev/sdb1 partition.
  4. Add an entry to the /etc/fstab file to mount your /dev/sdb1 device to the /mnt/exercise01 directory. Your new entry should be similar to the following:
UUID=<DEVICE_UUID> /mnt/exercise01 xfs defaults 0 2
  1. Run the command mount -a to read the /etc/fstab file and mount all currently unmounted devices.
  2. Verify the /dev/sdb1 partition was mounted successfully by running the lsblk command. You should see output simiar to the following:
[root@lsa-i ~]# lsblk
NAME                    MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda                       8:0    0   40G  0 disk
├─sda1                    8:1    0    1M  0 part
├─sda2                    8:2    0    1G  0 part /boot
└─sda3                    8:3    0   39G  0 part
  ├─VolGroup00-LogVol00 253:0    0 37.5G  0 lvm  /
  └─VolGroup00-LogVol01 253:1    0  1.5G  0 lvm  [SWAP]
sdb                       8:16   0    1G  0 disk
└─sdb1                    8:17   0 1023M  0 part /mnt/exercise01
sdc                       8:32   0    1G  0 disk
  1. Run the command df -h to see the current disk usage of the system. Take note of the value in the Used column for /dev/sdb1. My output is below.
[root@lsa-i ~]# df -h
Filesystem                       Size  Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00   38G  823M   37G   3% /
devtmpfs                         910M     0  910M   0% /dev
tmpfs                            920M     0  920M   0% /dev/shm
tmpfs                            920M  8.5M  911M   1% /run
tmpfs                            920M     0  920M   0% /sys/fs/cgroup
/dev/sda2                       1014M   63M  952M   7% /boot
tmpfs                            184M     0  184M   0% /run/user/1000
/dev/sdb1                       1020M   33M  988M   4% /mnt/exercise01
  1. Run the command dd bs=1M count=50 if=/dev/urandom of=/mnt/exercise01/myfile to create a file /mnt/exercise01/myfile with a size of around 50 MiB. This command may take a few seconds to run.
  2. Run the command df -h to see the current disk usage of the system. Take note of the value in the Used column for /dev/sdb1. Notice how the value has increased by roughly 50 MiB. My output is below.
[root@lsa-i ~]# df -h
Filesystem                       Size  Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00   38G  823M   37G   3% /
devtmpfs                         910M     0  910M   0% /dev
tmpfs                            920M     0  920M   0% /dev/shm
tmpfs                            920M  8.5M  911M   1% /run
tmpfs                            920M     0  920M   0% /sys/fs/cgroup
/dev/sda2                       1014M   63M  952M   7% /boot
tmpfs                            184M     0  184M   0% /run/user/1000
/dev/sdb1                       1020M   83M  938M   9% /mnt/exercise01
  1. Run the command fdisk /dev/sdc to begin formatting the device /dev/sdc. Follow the subtasks below to format the device with 2 partitions with 256 MiB and 512 MiB respectively:
    1. Type n and hit ++enter++ to create a new partition.
    2. Type p and hit ++enter++ to make this a primary partition.
    3. Type 1 and hit ++enter++ to make this primary partition the first partition on this device.
    4. Hit ++enter++ to accept the default first sector.
    5. Type +256M and hit ++enter++ to give the partition a size of 256 MiB.
    6. Type p and hit ++enter++ to print the proposed partition changes. You should see the partition /dev/sdc1.
    7. Type n and hit ++enter++ to create another new partition.
    8. Type p and hit ++enter++ to make this a primary partition.
    9. Type 2 and hit ++enter++ to make this primary partition the second partition on this device.
    10. Hit ++enter++ to accept the default first sector.
    11. Type +512M and hit ++enter++ to give the partition a size of 512 MiB.
    12. Type p and hit ++enter++ to print the proposed partition changes. You should see the partition /dev/sdc2.
    13. Type w and hit ++enter++ to write these changes to the disk and exit.
  2. Verify the /dev/sdc1 and /dev/sdc2 partitions were created successfully by running the command lsblk. You should see output similar to the following:
[root@lsa-i ~]# lsblk
NAME                    MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda                       8:0    0   40G  0 disk
├─sda1                    8:1    0    1M  0 part
├─sda2                    8:2    0    1G  0 part /boot
└─sda3                    8:3    0   39G  0 part
  ├─VolGroup00-LogVol00 253:0    0 37.5G  0 lvm  /
  └─VolGroup00-LogVol01 253:1    0  1.5G  0 lvm  [SWAP]
sdb                       8:16   0    1G  0 disk
└─sdb1                    8:17   0 1023M  0 part /mnt/exercise01
sdc                       8:32   0    1G  0 disk
├─sdc1                    8:33   0  256M  0 part
└─sdc2                    8:34   0  512M  0 part
  1. Run the command mkfs.ext4 /dev/sdc1 to create an EXT4 file system on the /dev/sdc1 partition.
  2. Run the command mkfs.xfs /dev/sdc2 to create an XFS file system on the /dev/sdc2 partition.
  3. Run the command lsblk -f to list the UUIDs and file system types of the /dev/sdc1 and /dev/sdc2 partitions. You'll need this information for the /etc/fstab file.
  4. Run the command mkdir /mnt/small to create a directory to use for mounting the /dev/sdc1 partition.
  5. Run the command mkdir /mnt/large to create a directory to use for mounting the /dev/sdc2 partition.
  6. Add two entries to the /etc/fstab file to mount your /dev/sdc1 and /dev/sdc2 devices to the /mnt/small and /mnt/large directories respectively. Your new entries should be similar to the following:
UUID=<DEVICE_UUID> /mnt/small ext4 defaults 0 2
UUID=<DEVICE_UUID> /mnt/large xfs defaults 0 2
  1. Run the command mount -a to read the /etc/fstab file and mount all currently unmounted devices.
  2. Verify the /dev/sdc1 and /dev/sdc2 partitions were mounted successfully by running the lsblk command. You should see output simiar to the following:
[root@lsa-i ~]# lsblk
NAME                    MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda                       8:0    0   40G  0 disk
├─sda1                    8:1    0    1M  0 part
├─sda2                    8:2    0    1G  0 part /boot
└─sda3                    8:3    0   39G  0 part
  ├─VolGroup00-LogVol00 253:0    0 37.5G  0 lvm  /
  └─VolGroup00-LogVol01 253:1    0  1.5G  0 lvm  [SWAP]
sdb                       8:16   0    1G  0 disk
└─sdb1                    8:17   0 1023M  0 part /mnt/exercise01
sdc                       8:32   0    1G  0 disk
├─sdc1                    8:33   0  256M  0 part /mnt/small
└─sdc2                    8:34   0  512M  0 part /mnt/large
  1. Practice these and other commands until you feel comfortable with them. You'll need to run vagrant destroy and then vagrant up to reset your virtual machine if you wish to do these exercises over.
  2. When finished, use the exit command to exit the shell and logout.